MATSCEN 5655
Transcript Abbreviation:
Biomed Add Manuf
Course Description:
Survey of Additive Manufacturing (AM) patient data acquisition and medical device Computer Aided Design (CAD), medical research and clinical grade AM materials and AM fabrication methods, quality assurance/management systems and regulatory (FDA) approval process.
Course Levels:
Undergraduate (1000-5000 level)
Graduate
Designation:
Elective
General Education Course:
(N/A)
Cross-Listings:
(N/A)
Credit Hours (Minimum if “Range”selected):
3.00
Max Credit Hours:
3.00
Select if Repeatable:
Off
Maximum Repeatable Credits:
(N/A)
Total Completions Allowed:
(N/A)
Allow Multiple Enrollments in Term:
No
Course Length:
14 weeks (autumn or spring)
Off Campus:
Never
Campus Location:
Columbus
Instruction Modes:
In Person (75-100% campus; 0-24% online)
Prerequisites and Co-requisites:
Prereq: 3141, or Grad standing in MGEL, MatScEn, WeldEng, BiomedE, CBE, MechEng, AeroEng, or ISE, or permission of instructor.
Electronically Enforced:
No
Exclusions:
(N/A)
Course Goals / Objectives:
Understand the requirements of 3D patient data acquisition, patient-specific CAD and mechanical modeling (i.e., Virtual Surgical Planning), and intra-operative guidance.
Understand how 3D fabrication technologies are used in biomedical research.
Understand how 3D fabrication technologies are used in the clinic.
Understand range of criteria used to design, validate, and use biocompatible, 3D printable, materials.
Understand basics of the regulatory process including Quality Assurance (QA) and/or Quality Management Systems, GLP assessment, and GMP production.
Check if concurrence sought:
No
Contact Hours:
| Topic | LEC | REC | LAB | LAB Inst |
|---|---|---|---|---|
| Block I: Data Acquisition and Design (5 lectures) Lectures 1-2: Overview; 3D image acquisition and processing (slice and surface scanning); medical and industrial imaging | 3.0 | 0.0 | 0.0 | 0 |
| Block I Lectures 3-4: 3D image preparation for 3D printing (CAD); Mechanical Modeling for biological applications | 3.0 | 0.0 | 0.0 | 0 |
| Block I Lecture 5: file set up for 3D printing | 1.5 | 0.0 | 0.0 | 0 |
| Block II: AM Processes for Biomedical Devices (7 lectures) Lectures 6-8: Polymer: Fused Deposition Modeling, Binder Jetting, Selective Laser Sintering, and Powderbed Fusion for Medical Applications. | 4.5 | 0.0 | 0.0 | 0 |
| Block II Lectures 9-10: Electrospinning, Melt Electrowriting, vat photocrosslinking: stereolithography and projection (mask) printing; Hydrogel bioprinting and bioassembly | 3.0 | 0.0 | 0.0 | 0 |
| Block III: Fabrication and Applications of AM Biomedical Devices (9 lectures) Lectures 13-15: FDM, Binderjetting, and SLS Applications | 4.5 | 0.0 | 0.0 | 0 |
| Block III Lectures 16-19: Electrospinning, Melt Electrowriting, Vat Photocrosslinking, Hydrogels for Bioprinting and Bioassembly, Cells, Spheroids, and Organoids. | 6.0 | 0.0 | 0.0 | 0 |
| Block III Lectures 20-21: Powderbed Fusion Ceramics and Metals | 3.0 | 0.0 | 0.0 | 0 |
| Block IV: Regulator of AM Biomedical Devices (7 lectures) Lectures 22: biocompatibility in vitro (cytotoxicity) and in vivo (small animal models) | 1.5 | 0.0 | 0.0 | 0 |
| Block IV Lectures 23: large animal models | 1.5 | 0.0 | 0.0 | 0 |
| Block IV Lectures 24: FDA (Presubmission, IDE, IND, 510k, PMA) | 1.5 | 0.0 | 0.0 | 0 |
| Block IV Lecture 25: Translation to the Clinic | 1.5 | 0.0 | 0.0 | 0 |
| Total | 34.5 | 0 | 0 | 0 |
Grading Plan:
Letter Grade
Course Components:
Lecture
Grade Roster Component:
Lecture
Credit by Exam (EM):
No
Grades Breakdown:
| Aspect | Percent |
|---|---|
| Quiz | 20% |
| Mid-term Exam | 25% |
| Project | 30% |
| Final | 25% |
Representative Textbooks and Other Course Materials:
| Title | Author | Year |
|---|---|---|
| No Textbooks and Other Course Materials Entered. | ||
ABET-CAC Criterion 3 Outcomes:
(N/A)
ABET-ETAC Criterion 3 Outcomes:
(N/A)
ABET-EAC Criterion 3 Outcomes:
(N/A)
Embedded Literacies Info:
Attachments:
(N/A)
Additional Notes or Comments:
(N/A)
Basic Course Overview:
MATSCEN_5655_basic.pdf
(11.47 KB)