ISE 5520
Transcript Abbreviation:
IndustrlAutomation
Course Description:
Industrial Automation teaches the design, application, and computer logic and control of various mechanical, pneumatic, electrical, and electronic sensors and actuator devices for industrial systems.
Course Levels:
Undergraduate (1000-5000 level)
Graduate
Designation:
Elective
General Education Course:
(N/A)
Cross-Listings:
(N/A)
Credit Hours (Minimum if “Range”selected):
1.50
Max Credit Hours:
1.50
Select if Repeatable:
Off
Maximum Repeatable Credits:
(N/A)
Total Completions Allowed:
(N/A)
Allow Multiple Enrollments in Term:
No
Course Length:
7 weeks (autumn or spring)
Off Campus:
Never
Campus Location:
Columbus
Instruction Modes:
In Person (75-100% campus; 0-24% online)
Prerequisites and Co-requisites:
Prereq: 2500, or Grad standing in Engineering.
Electronically Enforced:
No
Exclusions:
(N/A)
Course Goals / Objectives:
The general goal of ISE 5520 is to introduce engineering students to the fundamentals of industrial automation. Specifically, upon completion of ISE 5520, students should be able to:
1. identify the characteristics of manufacturing processes, assembly and material handling operations that lend themselves to automation vs. manual operation
2. determine if the automation should be fixed, programmable, or flexible
2. determine if the automation should be fixed, programmable, or flexible
3. demonstrate proficiency in the selection and use of sensors, actuators, interface devices, and process controllers for automation devices and process control
4. for tasks described in prose, generate ladder logic for programmable logic controllers (PLC?s), and demonstrate the performance of automation and control systems using PLC?s
5. specify, select, wire and plumb electro-pneumatic devices, circuits and systems for automation
6. demonstrate knowledge of safety issues in the design and use of automation devices and systems
Check if concurrence sought:
No
Contact Hours:
| Topic | LEC | REC | LAB | LAB Inst |
|---|---|---|---|---|
| Course learning objectives, course and lab administration, introduction to the principles of industrial automation and safety issues. Introduction to pneumatics. Lab 1: Create a basic circuit using pneumatic devices. | 1.0 | 0.0 | 2.0 | 0 |
| Introduction to Programmable Logic Controllers (PLC’s). Lab 2: PLC basics; power supplies, switches, relays, and ladder logic | 1.0 | 0.0 | 2.0 | 0 |
| PLC timers and counters. Lab 3: Build and demonstrate a PLC/pneumatic/LED device utilizing timers/counters. | 1.0 | 0.0 | 2.0 | 0 |
| Introduction to control systems using industrial sensors with PLC’s. Lab 4: Build and demonstrate a control device using sensors, PLC, and actuators. | 1.0 | 0.0 | 2.0 | 0 |
| Control systems and plant floor communications. Lab 5: Build and demonstrate a more complex control device using sensors, PLC, and actuators. | 1.0 | 0.0 | 2.0 | 0 |
| Introduction to electric motors and motor control. Lab 6: Control a servo motor via closed loop control | 1.0 | 0.0 | 2.0 | 0 |
| Troubleshooting automated systems. Lab 7: Open for remedial lab work, or troubleshooting experience | 1.0 | 0.0 | 2.0 | 0 |
| Total | 7 | 0 | 14 | 0 |
Grading Plan:
Letter Grade
Course Components:
Lecture
Lab
Grade Roster Component:
Lecture
Credit by Exam (EM):
No
Grades Breakdown:
| Aspect | Percent |
|---|---|
| Home assignments and in-class assignments | 20% |
| Midterms (2) | 30% |
| Lab assignments | 50% |
Representative Textbooks and Other Course Materials:
| Title | Author | Year |
|---|---|---|
| Stenerson, J., Industrial Automation and Process Control, ISBN#0-13-033030-2, Prentice Hall, 2003 |
ABET-CAC Criterion 3 Outcomes:
(N/A)
ABET-ETAC Criterion 3 Outcomes:
(N/A)
ABET-EAC Criterion 3 Outcomes:
(N/A)
Embedded Literacies Info:
Attachments:
(N/A)
Additional Notes or Comments:
(N/A)
Basic Course Overview:
ISE_5520_basic.pdf
(10.82 KB)