CBE 3521
Transcript Abbreviation:
Transport II
Course Description:
Emphasis on conduction, convective and radiation heat transfer, mass transfer and stagewise operations with applied computational problems.
Course Levels:
Undergraduate (1000-5000 level)
Designation:
Elective
Required
General Education Course:
(N/A)
Cross-Listings:
(N/A)
Credit Hours (Minimum if “Range”selected):
4.00
Max Credit Hours:
4.00
Select if Repeatable:
Off
Maximum Repeatable Credits:
4.00
Total Completions Allowed:
(N/A)
Allow Multiple Enrollments in Term:
No
Course Length:
14 weeks (autumn or spring)
12 weeks (summer only)
Off Campus:
Never
Campus Location:
Columbus
Instruction Modes:
In Person (75-100% campus; 0-24% online)
Prerequisites and Co-requisites:
Prereq: 2420 (420), and enrollment in CBE, FABEng, or EngPhysics major; or permission of instructor or Grad standing.
Electronically Enforced:
No
Exclusions:
Not open to students with credit for 522.
Course Goals / Objectives:
Be familiar with derivation of partial differential equations of heat transfer from First Law of Thermodynamics
Master solution of steady-state one-dimensional heat transfer problems
Be familiar with the solution of unsteady-state heat transfer problems in one spatial dimension and the solution of steady-state heat transfer problems in more than one spatial dimension
Master the solution of simple heat transfer problems involving heat source
Be familiar with the dimensionless-analysis foundations of correlations for heat transfer coefficients in the presence of fluid motion
Master aspects of heat exchanger design
Be familiar with radiation heat transfer problems
Use a computer tool (e.g., Maple) to calculate and analyze heat transfer problems
Master the application of the mass, heat, and momentum balances to engineering problems involving mass transfer
Be familiar with equations describing molecular diffusion through gases, liquids, and solids
Be familiar with techniques used to estimate diffusivities in binary and multi-component systems
Be familiar with techniques used to estimate mass transfer coefficients in laminar and turbulent flows
Understand the analogies between heat, mass, and momentum transfer
Master the application of computational techniques to solve mass transfer problems
Be exposed to the general approach for the design of continuous contact and stagewise absorption towers
Check if concurrence sought:
No
Contact Hours:
| Topic | LEC | REC | LAB | LAB Inst |
|---|---|---|---|---|
| Introduction to heat transfer, Combined mechanisms of heat transfer | 1.0 | 0.0 | 0.0 | 0 |
| First law of thermodynamics, Differential equations for heat transfer, One-dimensional, steady-state conduction (walls & radial systems) | 1.0 | 2.0 | 0.0 | 0 |
| One-dimensional conduction with heat source, Heat transfer from extended surfaces | 2.0 | 2.0 | 0.0 | 0 |
| Two-dimensional steady-state conduction | 1.0 | 0.0 | 0.0 | 0 |
| Unsteady-state conduction | 1.0 | 2.0 | 0.0 | 0 |
| Convective heat transfer/dimensional analysis, Convective heat transfer/boundary layer | 1.0 | 0.0 | 0.0 | 0 |
| Energy- and momentum-transfer analogies, Reynolds transport theorem | 1.0 | 2.0 | 0.0 | 0 |
| Natural convection correlations, Forced convection correlations | 2.0 | 1.0 | 0.0 | 0 |
| Boiling and condensation, Heat exchanger design | 2.0 | 2.0 | 0.0 | 0 |
| Radiation heat transfer | 2.0 | 2.0 | 0.0 | 0 |
| Flux equations, Fick’s law, Diffusion coefficient (Diffusivity) | 2.0 | 2.0 | 0.0 | 0 |
| Steady-state mass transfer | 1.0 | 0.0 | 0.0 | 0 |
| Diffusion with chemical reaction | 1.0 | 2.0 | 0.0 | 0 |
| Unsteady-state mass transfer | 2.0 | 2.0 | 0.0 | 0 |
| Numerical solution – finite difference method | 2.0 | 2.0 | 0.0 | 0 |
| Convective mass transfer coefficients, Dimensionless numbers | 1.0 | 0.0 | 0.0 | 0 |
| Analogies and correlations between heat, mass, and momentum transfer | 1.0 | 2.0 | 0.0 | 0 |
| Equilibrium stages, Continuous gas/liquid contactors | 2.0 | 2.0 | 0.0 | 0 |
| Absorption in multicomponent systems, Staged columns | 1.0 | 0.0 | 0.0 | 0 |
| Absorption in multicomponent systems, Packed columns | 1.0 | 2.0 | 0.0 | 0 |
| Total | 28 | 27 | 0 | 0 |
Grading Plan:
Letter Grade
Course Components:
Recitation
Lecture
Grade Roster Component:
Lecture
Credit by Exam (EM):
No
Grades Breakdown:
| Aspect | Percent |
|---|---|
| Midterm | 30% |
| Project and Presentation | 30% |
| Final exam | 40% |
Representative Textbooks and Other Course Materials:
| Title | Author | Year |
|---|---|---|
| Fundamentals of Momentum, Heat, and Mass Transfer, 4th Edition | James R. Welty, Charles E. Wicks, Robert E. Wilson, & Gregory Rorrer | |
| Mass Transfer: Principles and Applications, | Diran Basmadjian | |
| An Introduction to Mass and Heat Transfer | Stanley Middleman |
ABET-CAC Criterion 3 Outcomes:
(N/A)
ABET-ETAC Criterion 3 Outcomes:
(N/A)
ABET-EAC Criterion 3 Outcomes:
(N/A)
Embedded Literacies Info:
Attachments:
(N/A)
Additional Notes or Comments:
(N/A)
Basic Course Overview:
CBE_3521_basic.pdf
(13.56 KB)